12v 9Ah high performance battery for motorcycle

Model	Voltage	CCA	Capacity	Weight	Dimension(mm)	Replaced YUASA
MF12V9-2A	12V	120A	9AH	2.95 KG	137*76*133	12N9-3B, YB9L-B

Product Characteristics:

MF Maintenance Free AGM / VRLA battery are constructed with lead calcium alloy and absorbed glass mat technology to provide you with " total maintenance-free" operation. No spills, no leaks, no water to check. This design will provide you with the most powerful, highest amp hour capacity, longest cycle-life product on the market. In addition, the fiberglass mat separators and high cell compression extend battery life by delivering superior vibration resistance from engine abuse or extreme road conditions.

Products Performance

1: Storage Characteristics'
Voltage >=7.2V after the battery being stored in 40±2ºC environment for 49days, then discharge at high multiple rate for 30seconds.
2: Electrolyte dehydrate characteristics
Battery dehydrate rate ≤0.9g/ah after fully charged and then continue to be charged at 14.4V in 40±2ºC environment for 1000 consecutive hours.
3:Anti-Vibration characteristics
Battery voltage ≥12.7V,no leakage of electrolyte ,no breakage of container ,after vibrating vertically at acceleration rate of 68.6m/s,frequence 50-500Hz for 2hours.
4:Self-Discharge rate≤3%/month
5:Internal Resistance≤12m Ovum
6:Products excellence performance
Can be stored for a long time period and no need to recharge during storage, battery left over capacity can be as high as 70% after being storage for 1 year and can be restored to 85% of its full capacity when fully recharged.
Over discharge performance under low voltage : this battery can be restored to 80% of its full capacity while others only being rendered to failed because of the Stalinization of the sulphur acid and its. Consequent maintenance ,after subject to long period of replaced over discharge ding due to frequent engine igniting, lighting and insufficient charge for the battery caused by short distance driving and low speed.

Installation and Maintenance
1. Always connect the positive terminal firstly.
DO NOT reverse polarity otherwise the electrical equipment of motorcycle will damage.
Caution:
*Some can't be activated due to the different performance of different vehicle. Start the engine for more times or step on gas which can more easily to activate.
*Manual activation is recommend to achieve exact date recorded.
2. During acid filling, wearing acid-proof cloths, rubber boots, shield glass and rubber glove etc.
If the skin and clothes are splashed by acid, wash by large quantity of water. Seek medical help if necessary.
3. DO NOT over discharging the battery, charging the battery timely after discharging.
4. Dismount or disconnect the negative terminal of battery if the motorcycle hasn't been in service for long term.
5. DO NOT check the battery has power or not by short-circuit the terminal.
6. Regularly check the terminal connection and the surface of terminal is clean or not to ensure well connection.
7. Storage the battery where is 5~25ºC, dry, ventilated and no direct sunshine. Keep the battery at least 2m away from the heat source. Regularly check and maintain the battery.

Contact us if you need more details on Yahama Type Replacement. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Honda and Suziki Motorcycle Replacement、YTX 9Ah with Acid Pack. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : VRLA Motorcycle Batteries > SMF Motorcycle Batteries